|
|
| Rivi 19: |
Rivi 19: |
| * 6 × molex | | * 6 × molex |
| * 2 × levykeasema | | * 2 × levykeasema |
| 115/230 Vac Switch Selectable
| | |- |
| Thermal Fan-speed Control
| | !PFC |
| 12cm Cooling fan
| | |Passiivinen (optio) |
| Dimension: 150(L)x140(W)x86(H)mm
| | |- |
| Environmental
| | !Syöte |
| Operating temperature: 5oC to 40oC
| | | |
| Storage temperature: -20oC to 70oC
| | {| |
| MTBF: > 50,000hrs at 80% load, 25oC ambient
| | |- |
| EMI/RFI
| | !Jännite |
| FCC Part 15 Class B, CISPR 22 Class B, CE
| | |90—132 Vac / 180—264 Vac |
| SAFETY
| | |- |
| CUL,TUV,CB,CSA,BSMI,DEMKO,NEMKO,SEMKO,FIMKO
| | !Taajuus |
| Electrical
| | |47 ... 63 Hz |
| Specification
| | |- |
| Input
| | !Virta |
| Input range: 90V~132Vac or 180V~253Vac.
| | |10 / 6 A (115—230 Vac) |
| Frequency: 47~63Hz.
| | |- |
| Input Current: 400W 10A / 6A FOR 115/230 Vac.
| | !Energiatehokkuus |
| Efficiency: 65% at full load, nominal line.
| | |65 % täydellä kuormituksella, nimellistaso |
| Inrush current: The maximum inrush current shall be less than 60A peak from a cold start at any line voltage.
| | DC O/P +3.3V +5V +12V1 +12V2 -12V +5Vsb |
| | Current 20A 14A 14A 13A 0.3A 2.5A |
| | +5V & +3.3V combined load 130W |
| Output | | Output |
| Max.:400W
| | +5V & +3.3V &+12Vcombined load 385W |
| Hold up time: >12ms at full load, nominal line.
| |
| Rise time: <20ms at full load, nominal line.
| |
| Over voltage protection: +3.3V, +5V, +12V.
| |
| Over power protection: 120-160%.
| |
| Short circuit: Latch Off.
| |
| Power good signal: TTL compatible.
| |
| Output
| |
| Output
| |
| I min
| |
| I max.
| |
| I peak
| |
| +3.3V
| |
| 1
| |
| 0.5A
| |
| 20A
| |
|
| |
| +5V
| |
| 2
| |
| 0.5A
| |
| 14A
| |
|
| |
| +12V1
| |
| 3
| |
| 1.0A
| |
| 14A
| |
|
| |
| +12V2
| |
| 4
| |
| 1.0A
| |
| 13A
| |
|
| |
| -12V
| |
| 5
| |
| 0.0A
| |
| 0.3A
| |
|
| |
| +5VSB
| |
| 6
| |
| 0.0A
| |
| 2.5A
| |
|
| |
| +5V & +3.3V combined load
| |
| 130W
| |
| +5V & +3.3V & +12V combined load | |
| 385W | |
| Total power rating
| |
| 400W
| |
| REGULATION
| |
| +3.3V:3.14V~3.47V == ±5%
| |
| +12V1:11.4V~12.6V == ±5%
| |
| -12V:-10.8V~-13.2V == ±10%
| |
| +5V:4.75V~5.25V == ±5%
| |
| +12V2:11.4V~12.6V == ±5%
| |
| +5VSB:4.75V~5.25V == ±5%
| |
| RIPPLE & NOISE(mV)
| |
| +3.3V == 100mVp-p
| |
| +12V1 == 150mVp-p
| |
| -12V == 150mVp-p
| |
| +5V == 80mVp-p
| |
| +12V2 == 150mVp-p
| |
| +5VSB == 80mVp-p
| |
| | |
| |} | | |} |
|
| |
|
